Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: MB1 to Tokyo Hy-power HL-1.5KFX

MB1 to Tokyo Hy-power HL-1.5KFX 1 week 17 hours ago #136

  • gdeuss
  • gdeuss's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 5
  • Thank you received: 0
I've racked my head on this one with no luck...EE can't figure it our either. Looking for info to interface the MB-1 to the Tokyo Hy-power 1.5 amplifier.
TIA!

Greg

Please Log in to join the conversation.

MB1 to Tokyo Hy-power HL-1.5KFX 1 week 6 hours ago #139

Maybe 1 of these? It's what I use between my Elecraft and the MB1 as well as every other radio I use the amp with.

www.dxengineering.com/parts/ame-arb-704i...zGujgJkaArtpEALw_wcB

73
NI0Z

Please Log in to join the conversation.

MB1 to Tokyo Hy-power HL-1.5KFX 1 week 2 hours ago #140

  • gdeuss
  • gdeuss's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 5
  • Thank you received: 0
Thank you...my amplifier keys and works just fine with the MB1. The real issue is that it won't band track. EE has looked into the issue without resolution. Seems like perhaps a CAT protocol issue. FWIW, I can get my CAT port to talk to my Palstar AT-AUTO. My amp tracked just fine with my old IC-7700 and Yeasu radios.

Please Log in to join the conversation.

MB1 to Tokyo Hy-power HL-1.5KFX 1 week 2 hours ago #142

  • NI0Z
  • NI0Z's Avatar
  • Offline
  • Administrator
  • Administrator
  • Posts: 39
  • Thank you received: 3
Would perhaps DDUtil help and allow you to do that?

Please Log in to join the conversation.

MB1 to Tokyo Hy-power HL-1.5KFX 5 days 16 hours ago #143

  • gdeuss
  • gdeuss's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 5
  • Thank you received: 0
I'm not really sure. I have been in SDR's from the SDR-1000 days without too much problem. The MB1 is a geat rig but it is hard for me to interface hardware and software.

Please Log in to join the conversation.

MB1 to Tokyo Hy-power HL-1.5KFX 5 days 16 hours ago #144

  • NI0Z
  • NI0Z's Avatar
  • Offline
  • Administrator
  • Administrator
  • Posts: 39
  • Thank you received: 3
Looks like you can do this with DDUtil 3 and a custom cable and 9600 baud 8N1. If your amp already has a serial cable to your PC then you can just use a a vsp from the MB1.. and if you want to run stuff off another PC then you can use lan based serial ports from the MB1 to your PC and then run anything you want off another PC. Anyways, you should be able to pass the band data to your amp via DDUtil. I had to build a cable for my Anan to do something I wanted and you can see in this link that even with Flex he had to use DDUtil and cable.

community.flexradio.com/flexradio/topics..._power_amp_and_tuner


73
NI0Z

Please Log in to join the conversation.

Last Edit: by NI0Z.
  • Page:
  • 1
Time to create page: 0.433 seconds